VoIP V3 Paging Server (with Night Ringer)
The CyberData V3 VoIP Paging Server enables users through a single SIP phone extension, to access multiple zones for paging in a VoIP network and to connect to legacy analog overhead paging systems.
A second SIP extension can be configured as a night ringer playing a user-uploadable audio file.
The V3 Paging Server allows direct connection to legacy analog paging amplifiers that require a “Page Port” type input that meets a balanced 600 Ohm 10Vpp signal or a 10k Ohm Hi-Z 2vpp signal. You can also take advantage of connections for a dry contact relay (page start output) and sense input (Fault Sense Input) for additional functionality.
The easy-to-use, web-based configuration provides a graphical user interface to set up to 100 paging zones for IP paging with unique multicast address and port number combinations.
The V3 Paging Server connects via a single CAT 5 or 6 network cable to a standard PoE 802.3af compliant switch.
► Supports 600 Ohm output
► Page start relay contacts
► Remote amp fault sensor
► SIP RFC 3261 compatible
► Multicast output
► Two SIP endpoints (one for Night Ringer)
► DTMF control of zone selection
► Delayed Page Support
► Line-In connection for music
► Line-out connection to support analog Amps
Protocol SIP RFC 3261 Compatible
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3af or 48VDC
Operating Temperature -30 to 55C (-22 to 131F)
Payload Types G711
Regulatory Compliance FCC Class A, UL 60950
Page Port Output Balanced 600 Ohm 10 VPP
Input Signal Amplitudes 2.0 VPP maximum
Input Impedance 10k ohm
Output Signal Amplitudes 2.0 VPP maximum
Output Level +2dBm nominal
Total Harmonic Distortion 0.5% maximum
Output Impedance 10k ohm
Dimension 6.11″ x 4.05″ x 1.15″ (L x W x H)
Boxed Weight 1.8 lbs.
Warranty 2 Year Limited
Part Number 011146