pat-24

Micro Analog Telephone Adapter

Product Description

Micro Analog Telephone Adapter Technical Specifications

Voice Connectivity
  • 2-wire Loopstart, RJ-11/12
  • Short haul loop 1.1 km @3REN
  • Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation
Connectivity 1 10/100Base-TX Full Duplex/Autosensing Ethernet RJ-45
Voice Processing (signalling dependent)
  • SIP
  • Voice CODECS (G.711 A-Law/µ-Law (64 kbps); G.726 (ADPCM 40, 32, 24, 16 kbps); G.723.1 (5.3 or 6.3 kbps); G.729ab (8 kbps))
  • G.168 echo cancellation
  • 2 parallel voice connections
  • DTMF detection and generation
  • Carrier tone detection and generation
  • Silence suppression and comfort noise
  • Configurable dejitter buffer
  • DTMF in-band & out-of-band
  • Configurable transmit packet length
  • RTP/RTCP (RFC 1889)
  • STUN
Voice Services/Features
  • Anonymous CallerID block
  • Call blocking
  • Call forward – on busy
  • Call forward – selective
  • Call forward – unconditional
  • Call hold/retrieve
  • Call return
  • Call transfer – blind
  • Call transfer – with consultation
  • Call waiting/retrieval
  • Caller-ID
  • Conference drop
  • Conferencing (3-way calling)
  • Distinctive ring
  • Do not disturb
  • Hotline calling
  • Incoming CallerID on/off
  • IP URL dialing
  • Message waiting indication
  • Self-caller ID block
  • Speed dial
  • Voicemail message retrieval
  • Warmline calling
IP Services
  • NAPT
  • DHCP client
  • PPPoE
  • Programmable static routes
  • ICMP redirect (RFC 792); Packet fragmentation
  • VLAN support 802.1p/q
Call Routing & Services
  • Regular expression number matching
  • Regular expression number manipulation
  • Least Cost Routing Number blocking
  • Short-Dialing
  • Digit collection
  • Distribution-Groups & Hunt-Groups
  • 2nd call offering
Management
  • Browser configuration interface
  • Multilevel security access
  • TFTP & HTTP configuration & firmware loading
  • SNMP v2 agent
  • Syslog support
Power 100–240 VAC (50/60 Hz)
Temperature 0 to 40°C (32 to 104°F)
Humidity Humidity: 5 to 80% (non condensing)
Dimensions 20.8W x 3.4H x 16.5D cm (8.2W x 1.3H x 6.5D in.)
Weight < 450 g (15.9 oz)
Compliance
  • EMC compliance: EN55022 and EN55024
  • Safety compliance: EN 50950
  • CE compliance
  • FCC Part 15 Class B

Reviews

There are no reviews yet.

Be the first to review “Micro Analog Telephone Adapter”

Your email address will not be published. Required fields are marked *