lsamp2-205x175-150x150

SIP-enabled IP V2 Loudspeaker Amplifier (with Night Ringer)-AC-powered

Category:

Product Description

Description

Product Description

SIP-enabled IP V2 Loudspeaker Amplifier (with Night Ringer) – AC-powered

Description

The new CyberData SIP-enabled IP V2 Loudspeaker Amplifier is a Powered over Ethernet (PoE 802.3af or 802.3at) and VoIP paging device that provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.

With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line-out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Loudspeaker Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.

The V2 Loudspeaker Amplifier can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the Loudspeaker Amplifier is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Loudspeaker Amplifier stops ringing.

Features:

► SIP and Simultaneous Multicast
► Night Ringer function
► Dual-speed ethernet 10/100 Mbps
► Web-based configuration
► PoE 802.3at and 802.3af-enabled
► Line-in for background music
► Line-out connector

VoIP V2 Loudspeaker Amplifier Specifications
Protocol SIP RFC 3261 Compatible
Ethernet I/F 10/100 Mbps
Power Input PoE 802.3at or 802.3af
Operating Temperature -30 to 55C (-22 to 131F)
Payload Types G711
Output Level:
802.3af
802.3at*
Up to 8 watts
Up to 25 watts
Line In:
Input Signal Amplitudes
Input Impedance
2.0 VPP maximum
10k ohm
Line Out:
Output Signal Amplitudes
Output Level
Total Harmonic Distortion
Output Impedance
2.0 VPP maximum
+2dBm nominal
0.5% maximum
10k ohm
Regulatory Compliance FCC Class A, UL 60950
Dimension 14″ x 10″ x 4″ (H x W x D)
Warranty 2 Year Limited
Part Number 011095 (AC-powered)

Reviews

There are no reviews yet.

Be the first to review “SIP-enabled IP V2 Loudspeaker Amplifier (with Night Ringer)-AC-powered”

Reviews

There are no reviews yet.

Be the first to review “SIP-enabled IP V2 Loudspeaker Amplifier (with Night Ringer)-AC-powered”

Your email address will not be published. Required fields are marked *